Question

So my baby steam steriliser had some white lime scale in the base - I put vinegar in and ran a cycle . now it’s brown and burned on  Is there anyway to get this off ? Thanks

Answer 1

Put distilled vinegar in & leave for a while. it should lift the limescale x

Comments

@willawillabella1 thank you

Answer 2

A lemon cut in half in some water and leave over night

Answer 3

I just used a normal sponge scourer on mine and it came off

Answer 4

I use white distilled vinegar and a bit of water, run a cycle then when its finished wipe with a cloth or a sponge. Then just a normal cycle and wipe dry when finished

Comments

@electroshock that’s what I did  

---

@bumblebee1 ‍♀️

Answer 5

Boil water then add vinegar. Leave to stand until acid in vinegar stops and rinse out. If limescale still there, repeat step one again, rinse and boil clean water, tip out and boil clean water again, make a cup of coffee

Answer 6

Sounds like not enough water in the bottom when you're ran it. Happened to mine and couldn't fix it I'm afraid x

Answer 7

Your not meant to put vinegar in and turn it on. U r supposed to pour it in and leave it to settle for 30 mins or over night and rinse it out and do a normal cycle

Comments

@fairground93 I thought the same that's all I did with mine was just put the white vinegar init left it for a while then cleaned it with an old toothbrush then rinced out with water then put on a cycle x

---

@calorifacient toothbrush is a good idea youtube best to ask or a scrubber and scrub it once its rested comes straight off. I knackered mt first one went down to bare metal  

Answer 8

Go to chemist & get some gel stuff for kettles. ask chemist he/She will know. It's been 20yrs since I used it but it's brilliant & still available x

Answer 9

All you need to clean it is a sponge scourer