I have a couple GE IS-ZW-LM-1 Z-Wave Lamp Plugs here and at another house. Here I use SmartThings, the other house they are connected to a Simon XT alarm panel. At the other house the auto-sensing feature works. Basically you leave the lamp switch in the on position so you can control it with z wave, but the plug is turned off in z wave, you can flip the lamp switch off, then back on, and it will turn on power to the lamp, so you can manually turn on the lamp without having to touch the button on the plug. Is there a way to make this function work with SmartThings?
☰